DiGiPro SPL Audio Analyzer For Pc – Windows 7/8/10 And Mac – Free Download

4.0.1

How to download the DiGiPro SPL Audio Analyzer for PC , Mac, Windows? The truth is you cannot download the DiGiPro SPL Audio Analyzer app directly on the PC devices. That is because it is an android application which is not yet deployed for the computer operating systems like Windows, Mac, etc.

So, is there any way to install the DiGiPro SPL Audio Analyzer android app on your computer? Fortunately, there are several ways of employing the DiGiPro SPL Audio Analyzer for pc, Windows 10, 7, 8 and Mac. You can make use of the alternative approaches to install the app on the PC.

Keep going through the document if you want to know the step by step procedure of configuring the DiGiPro SPL Audio Analyzer app on PC. This application brings the functionalities of a Sound Level Meter (SLM) and a Real Time Spectrum Analyzer (RTA) to your phone. SPL (dB) of the microphone (internal or external) signal.
Download
4.3/5 Votes: 32
Developer
Gaia Consulting
Version
4.0.1
Updated
April 11, 2019
Requirements
4.0 and up
Size
2.0M
Get it on
Google Play

aReport this app

Description

This application brings the functionalities of a Sound Level Meter (SLM) and a Real Time Spectrum Analyzer (RTA) to your phone. SPL (dB) of the microphone (internal or external) signal.

Suitable for acoustic measurements:
– SLM: traffic or ambient noise analysis (TNI, dBA/dBB/dBC, Leq)
– RTA: audio equipment frequency response analysis (spectrum, octaves, peaks, RMS)

This app has much more features (+) than the basic edition (no ads).

>>SLM main features:
• measurements in SPL
• 3 measuring modes (Dynamic, Average, Cumulative)
+ 3 weighting filter curves: dBA, dBB, dBC according to DIN-IEC 651
+ fast & easy calibration page
• sound level versus time chart
• current dB value, avg (Leq), min and max display
• Leq (wideband, RMS of the observation period)
• audio threshold trigger
+ sound level distribution chart
+ accumulated sound level chart
+ current value, Leq, L90, L50 and L10 values display
+ TNI (Traffic Noise index) display
+ exporting of measures, chart data (CSV) and screenshot (PNG)
• tested with samsung galaxy
• sharing of text values and screen bmp

>>RTA main features:
– measurements in SPL
+ 5 spectrum measuring modes (dynamic, average, peak, avg/exp smoothing)
– sound level versus linear frequency chart
+ sound level versus logarithmic frequency chart (HzLog)
+ 1/1 Octave Bands chart
– 1/3 Octave Bands chart
+ Microphone Equalizer (Internal or External) in 1/1 Octave bands
+ calibration in 1/1 Octave bands
+ 2 spectrum views (Panel & Chart, Landscape Chart)
– tap or swipe to select the proper frequency step
– long press to zoom
– 4 values versus selected frequency component displayed (current, Leq, max, min)
+ Leq (Octave, RMS of the observation period)
+ Leq (selected frequency, RMS of the observation period)
– 20hz/22kHz band, 44100 Hz sampling rate
+ adjustable FFT size (up to 8192, about 5 Hz accuracy) , adjustable FPS (up to 20)
+ exporting of measures/chart data (CSV) and screenshot (PNG)

>>Data collection
The application relies on the mobile microphone signal. To achieve the best results consider the following:
1) Easy Calibration (only the first time): Some mobiles are automatically calibrated in the first installation phase. For details see the calibration section of the user manual.
2) keep your fingers away from the mobile microphone
3) silence your phone to avoid any ring tones, vibrations and other sounds
4) orient the phone microphone toward the noise source keeping the correct distance
5) click on the function buttons

>>Troubleshooting
1) Wrong SPL/RTA calibration: See the calibration section
2) No signals detected below 20dB or over 100dB: most smart phone microphones do not work under 20 dB or over 100 dB
3) Signal attenuation near band limits: the mobile mic may attenuate frequencies <100 Hz and >15000 Hz

Read the embedded User Guide: for any info or troubleshooting you can contact us at [email protected]

DiGiPro SPL Audio Analyzer App Installation for the Windows 7, 8, 10

The DiGiPro SPL Audio Analyzer app is undoubtedly one of the best apps out there but unfortunately, it doesn’t offer services for the PC devices. That’s why you will not find the DiGiPro SPL Audio Analyzer app on Windows Store or Apple Store. However, you can enjoy the DiGiPro SPL Audio Analyzer app on PC by making use of an android emulator like Gameloop, Nox Player, or Memu Player.

The interesting thing is you can operate any android programs from Play Store and third-party sites on the emulators. Some of them even offer you the same level of experience as an original android device. Check out the steps below to install and run the DiGiPro SPL Audio Analyzer App on PC.

  1. Get your preferred android emulator program for windows operating system from the official download site of the software.
  2. Then install it. Post-installation, open the emulator software and complete the setup to run android apps.
  3. Now search for the DiGiPro SPL Audio Analyzer Apk on Google and find the file. Click on the APK file and bring it on the emulator UI by dragging.
  4. Now complete the installation of the DiGiPro SPL Audio Analyzer app on the emulator . Within a while, you should be able to operate and enjoy the DiGiPro SPL Audio Analyzer App from the virtual place.

What's new

Minor issues removal

Download links

Download

Video

Images

Leave a Reply

Your email address will not be published. Required fields are marked *